Plug in the cable → Open Device Manager (Windows) → Look under "Ports (COM & LPT)".
To recap:
Right-click it and select , then go to the Port Settings tab and click Advanced .
When you plug the scanner into a Windows 10 or 11 machine, one of two things usually happens: bmw scanner 140 drivers
Select , click "Have Disk" , and navigate to your downloaded driver folder.
: This scanner is primarily for 1990s and early 2000s models. It is not compatible with newer F-series or G-series BMWs. What You Can Do Once Installed
The Complete Guide to BMW Scanner 1.4.0 Drivers: Installation, Troubleshooting, and Setup Plug in the cable → Open Device Manager
The drivers for the BMW Scanner 1.4.0 are necessary to connect the scanner to your computer and enable communication between the scanner and the vehicle. The drivers are compatible with Windows operating systems, including Windows 10, 8, 7, and XP.
Step-by-Step Guide: Installing BMW Scanner 1.4.0 Drivers on Windows 10 & 11
Read and clear diagnostic trouble codes (DTCs) in all modules (DME, ABS, SRS, EWS, LCM, etc.). : This scanner is primarily for 1990s and early 2000s models
inside the scanner plug. This bridges the two K-lines required to read all the car's modules. Was this guide easy to follow? Installation steps Driver links
The BMW Scanner 1.4.0 is a diagnostic tool used to scan and diagnose issues with BMW vehicles. It is a popular tool among BMW enthusiasts and mechanics alike, providing detailed information about the vehicle's systems and allowing for advanced diagnostic and repair capabilities.
Plug the scanner into the car's OBDII port (located in the driver's footwell). Connect the USB cable to your laptop.
The BMW Scanner 1.4.0 (PA Soft) allows you to connect your laptop to your car’s OBD2 port to: