Check the hood switch (the cycle won't start if the hood isn't fully closed). Check the main power breaker. Poor Wash Results Ensure the wash arms are not clogged. Verify that the detergent concentration is correct.
| Feature | Specification | | :--- | :--- | | | Hood-type / Under-counter commercial dishwasher | | Dimensions (W x D x H) | Approx. 675 x 675 x 1400 mm (27" x 27" x 55") | | Power / Voltage | 6.6 kW / 380 V (Three-phase) | | Wash Tank Capacity | 45 Liters | | Temperature Settings | Wash at 60°C, Rinse at 90°C | | Productivity | Up to 800 plates/hour | | Cycle Times | Fixed cycles of 90 and 180 seconds | | Water Consumption | 3 Liters per rinse cycle | | Weight | 108 kg |
Clean the exterior with a stainless steel cleaner. 6. Troubleshooting (Fagor FI-80)
Approximately 32A (single phase) or 22A (three phase). Water Inlet: 3/4-inch National Pipe Thread (NPT). fagor fi-80 dishwasher manual
Note: The Fagor FI-80 is a commercial-grade under-counter dishwasher commonly used in restaurants, cafes, and catering facilities. This guide outlines the standard operation, cycle types, and maintenance procedures.
. This technology prevents the sudden surge of water from shattering delicate glassware, demonstrating that even industrial power can be tempered with a "gentle touch." Sustainable Power:
Approximately 675 mm (W) x 675 mm (D) x 1400 mm (H). Check the hood switch (the cycle won't start
Proper installation ensures valid warranty coverage and safe operation. Positioning and Leveling
Place the unit on a flat, stable surface capable of supporting its weight when filled with water (approx. 200 lbs).
Complete Guide to the Fagor FI-80 Dishwasher: Manual, Operations, and Troubleshooting Verify that the detergent concentration is correct
Wait for the cycle light to turn off. Raise the hood, allow the dishes to flash dry for a few seconds, and remove the rack. 4. Cleaning and Daily Maintenance
Typically requires a 230V connection. Ensure the data plate on the side of the unit is checked for specific electrical requirements before wiring. 3. Operational Procedures
Ensure the scrap filters and pump protection filters are clean and locked in place. Insert the overflow pipe securely into the drain seat. Close the front door completely. 2. Filling and Heating
Set the selector switch to the preparation/fill position. Wait for the machine to reach its operating temperatures (minimum for the tank and for the booster/rinse).
Ultimate Guide to the Fagor FI-80 Dishwasher: Manual, Operations, and Troubleshooting