Click the icon on the toolbar, or go to Program > Write Data To Radio . Click Start .
The KSP8100 supports full built-in encoding and decoding for CTCSS, DCS, DTMF, 2-Tone, and 5-Tone systems, enabling selective calling and repeater control.
The Prolific or FTDI USB-to-Serial driver that matches your programming cable's internal chipset. 2. Downloading and Installing the Software
Use the software to back up your radio’s default configuration before making changes, ensuring you can restore it if any issues arise during customization. kirisun programming software pt8100
Before changing any settings, you must read the existing data from the radio. This creates a backup file and ensures the software version matches the radio firmware.
Test the connection by clicking the icon (or selecting it via the Program menu). If successful, a progress bar will appear, and the current radio configuration will populate the screen. 4. Key Configuration Parameters in PT8100 CPS
Connect the programming cable to the radio's microphone port. Click the icon on the toolbar, or go
Users can set up built-in encoders and decoders for CTCSS, DCS, DTMF, 2-Tone, and 5-Tone signaling. This allows for selective calling to specific stations or the remote control of repeaters.
To successfully program your Kirisun PT8100, you need a specific hardware and software toolkit. Ensure you have the following items ready:
Before initiating the programming process, ensure you have the necessary hardware and software components prepared. Hardware Requirements The Prolific or FTDI USB-to-Serial driver that matches
Do not plug the programming cable into your computer until the drivers are installed.
Ensure you are using the correct software version for your specific radio firmware, as older software might not work with newer firmware. Step-by-Step Guide to Programming the Kirisun PT8100 1. Connecting the Radio Connect the programming cable to your computer.