Select English , then choose Fifth Normal System . Do not check the "Large Vision" system unless your laser cutter utilizes an active optical camera registration matrix.
Access the physical LCD screen menu on your Han's Yueming laser system. Navigate to System Network Settings and note down the factory-set static IP address (e.g., 192.168.1.100 ).
This is where the magic happens. You will have a different "cut" vs. "engrave" process by separating them onto different layers. smartcarve 43 manual
Set your computer's IP address to the same subnet (e.g., if the machine is 192.168.1.10 , set the PC to 192.168.1.15 ).
Run the installer. If a "publisher unknown" warning appears, select "More Info" and then "Run Anyway". Select English , then choose Fifth Normal System
To ensure proper installation and setup, follow these steps:
provides an English overview of the control system and operating specifications. Navigate to System Network Settings and note down
Before diving into the manual, let's take a brief look at the SmartCarve 43's key features:
: Measure your actual laser bed and type the X and Y limits into the workspace settings.
Before launching the software, ensure your computer meets the following specifications: Operating System: Windows 7, 8, or 10 (32/64-bit).
The most common methods are: