Skope Heated Towel - Rail Timer Instructions

Press the CLOCK button or wait 15 seconds for the screen to return to the main display. Switching Between Auto and Manual Modes

While holding , press the Day button repeatedly until the current day of the week matches the display.

The internal rechargeable backup battery is failing due to age. skope heated towel rail timer instructions

: You can increase the heating duration in 1-hour increments (up to a maximum of 11 hours): Turn the towel rail ON at the wall switch. Within 10 seconds , turn it OFF and then ON again.

Press to select your schedule frequency. Options typically include: Individual days (e.g., Monday only). Mon–Fri block (Best for work routines). Sat–Sun block (Best for weekend sleep-ins). Mon–Sun block (Same routine every day). Press the CLOCK button or wait 15 seconds

Press the TIMER button once. The screen will display "1 ON" and a flashing sequence of days.

Depending on your specific installation, your Skope towel rail will use either a built-in digital timer, a wall-mounted electronic timer, or a smart plug interface. Below are the comprehensive operating and programming instructions for the most common timer systems used with Skope heated towel rails. 1. Wall-Mounted Digital Timers (Standard 24/7 Models) : You can increase the heating duration in

Benefit: Rail is hot when you wake up, stays hot during your shower, and remains on long enough to dry the damp towel afterward. Block 1 ON: 06:00 AM | Block 1 OFF: 09:00 AM Block 2 ON: 06:30 PM | Block 2 OFF: 09:30 PM

: To extend the active heating phase, flip the wall switch off and back on within 10 seconds . Every single rapid repetition of this off/on toggle adds exactly 1 hour to the active timer loop (up to a maximum of 11 hours).