Ice Irp 260 Printer Driver Download [new] -

Navigate to the support or download section of the official ICE POS hardware website, or check the authorized distributor site where the device was purchased.

Choose the specific package matching your OS (e.g., Windows 10/11 Thermal Printer Driver ).

supports connections.

If you want to share the printer over a network using its built-in 100M Ethernet port: ice irp 260 printer driver download

If you still can’t find it, tell me:

This guide provides everything you need to find, download, and install the ICE IRP-260 printer driver for Windows and other platforms. 📥 Direct Download and Official Sources

Disclaimer: This article is for informational purposes. Always verify driver authenticity with your system administrator. Navigate to the support or download section of

After the installation finishes, plug in the USB cable. Windows should detect the device as "POS PRINTER" or "VENDOR THERMAL PRINTER" under Devices and Printers .

Which you are using (Windows 11, Linux, etc.)? Are you connecting via USB, Ethernet, or Serial ? Are you seeing a specific error code ?

Windows 7, Windows 8, Windows 10, and Windows 11 (Both 32-bit and 64-bit versions). Windows Server: Windows Server 2012, 2016, 2019, and 2022. If you want to share the printer over

Check the printer’s label for a “Model: IRP-260” followed by a small revision letter. Search that full model string (e.g., “IRP-260B”) instead of “ICE”.

If the official site is down (common with niche manufacturers), check resellers like , Register Tech , or Barcode Outlet . They often host clean copies of the driver for customers.

| | Specification | | :--- | :--- | | Manufacturer | ICE (Often branded by partners like iCE, EPOS, or ItChase) | | Model Name | IRP 260 | | Printing Technology | Direct Thermal (No ink or toner) | | Max Print Speed | Up to 260mm/sec (approximately 26 receipts per minute) | | Print Width | Standard 72mm on 80mm paper rolls | | Interfaces | USB 2.0, Serial (RS-232), and 100M Ethernet (RJ45) | | Command Set | ESC/POS (Standard in the industry, ensuring cross-platform compatibility) | | Emulation / Compatibility | TSC, DYMO, and Zebra cartridge compatibility (for label/barcode printing) | | Supported OS (Typical) | Windows (7, 8, 10, 11), Linux, Ubuntu, and macOS | | Power | 60 Watts |

The installer will ask you how the printer is connected. Select USB , Serial , or Ethernet (LAN) based on your preferred setup.