Chipgenius V421 New Link

Shows the power consumption specs of the device to help troubleshoot hardware connection issues. Step-by-Step Guide to Using ChipGenius

+-----------------------------------------------------------------+ | [Top Window] List of Connected USB Host Controllers & Devices | | -> USB Mass Storage Device - Generic Flash Disk | +-----------------------------------------------------------------+ | [Bottom Window] Raw Hardware Profiles & Detailed Diagnostics | | - Protocal Version: USB 2.0 / USB 3.0 | | - Current Speed: High Speed / Super Speed | | - USB Device ID: VID = 58F PID = 6387 | | - Controller Vendor: Alcor Micro | | - Controller Part-Number: AU6989SN-GTD | | - Flash ID code: AD3A14AB424A - Hynix - 1x/1y/1znm MLC | +-----------------------------------------------------------------+ Step 3: Isolate Key Repair Vectors

Plug your malfunctioning or suspect flash drive directly into a motherboard USB port. Avoid using external, unpowered USB hubs, as they can restrict power delivery and cause incomplete data readouts. Step 3: Run the Application

Open the specific MPTool software you downloaded, insert your corrupted flash drive, and let the software detect it. Load the default configuration optimized for your controller part number, and click or Update . The tool will completely wipe the corrupted firmware sector, map out bad memory blocks, reinstall fresh microcode, and format the drive back to its factory-original status. Important Safety Warnings & Troubleshooting

The most significant improvement in is its updated device database. Newer USB 3.2 Gen 2 and even early USB4 flash drives use controllers that older versions could not recognize, often reporting them as "Unknown Chip." chipgenius v421 new

Always download the utility from verified tech forums or reliable data recovery archives.

Version 4.21 introduces several database expansions and bug fixes that improve detection accuracy and usability.

The company that designed the processor steering the data (e.g., Phison, Alcor, Silicon Motion, SMI, Innostor).

Exposes fraudulent USB drives that have been hacked to show a larger capacity than they physically possess. Shows the power consumption specs of the device

is a highly effective, portable diagnostics utility used to extract structural and controller information from USB storage devices. It serves as a crucial tool for repairing corrupted flash drives, modifying firmware, and verifying fake storage capacity.

is a highly efficient, portable diagnostic software designed to identify USB controller chips and flash memory manufacturers instantly [1]. If you frequently repair USB drives, create bootable media, or suspect you bought a fake flash drive, this utility is indispensable. This comprehensive guide covers everything you need to know about the latest version of ChipGenius, its key features, and how to use it safely. What is ChipGenius v4.21?

While the core interface remains minimalist for speed, version 4.21 includes several refinements:

In a world where USB flash drives are often treated as disposable, ChipGenius v4.21 gives you the power to look under the hood, understand what you truly own, and potentially fix what others would throw away. That makes it not just a utility, but an essential piece of digital literacy equipment for the 2020s. Step 3: Run the Application Open the specific

is the definitive, gold-standard portable diagnostic software designed to look deep inside USB-connected hardware and extract technical specifications that standard operating systems mask . Whether you need to fix a corrupted flash drive, verify if a cheap storage drive is a counterfeit scam, or extract vital controller and memory manufacturer data for a firmware flashing project, this compact utility provides the exact technical information required to get the job done. What is ChipGenius v4.21?

If you are still using ChipGenius v4.00, v3.00, or even v4.18 – . The improvements in controller detection (especially for NVMe bridges and cheap First Chip controllers) and counterfeit warnings are worth the five-minute download.

Unveils the explicit microchip part version. This value is critical because matching Mass Production Tools (MP Tools) only target specific part revisions.

Remember: Knowledge of what’s inside your flash drive is the first line of defense against data loss. ChipGenius v4.21 puts that knowledge in your hands – quickly, deeply, and for free.

SPECgpc Benchmarks

By downloading any of the following benchmarks, you acknowledge that you have read, understand, and agree to abide by the terms of the SPECgpc License Agreement.

There have been reports of file corruption when using download accelerators/managers; please check the file size of your download on disk against the file sizes posted here, or use the MD5 checksums.

UPDATE (February 25, 2015): SPECviewperf 12.0.2 was released on February 25, 2015. It extends graphics performance measurement from physical to virtualized workstation configurations. Results for SPECviewperf 12.0.2 are comparable to those from SPECviewperf 12.0.1, but not to any other previous versions.

SPECviewperf 12 is a worldwide standard for measuring graphics performance based on professional applications. It measures the 3D graphics performance of systems running under the OpenGL and Direct X application programming interfaces. The benchmark does not require the full application and associated licensing to be installed on the system under test, simplifying set-up, running and results reporting.

SPECapc Benchmarks

By downloading any of the following benchmarks, you acknowledge that you have read, understand, and agree to abide by the terms of the SPECapc License Agreement.

Benchmarks marked as available via "FTP Download" are free to download and use. Benchmarks with a "Purchase" link will redirect you to SWREG in order to purchase a license and download the software.

NOTE: The SPECapc benchmarks provide only the performance testing software. They do not include the actual applications, which are the intellectual property of their respective software vendors (e.g. SPECapc for 3ds Max 2015 does not include a copy of 3ds Max 2015 software).

SPECapc for 3ds Max 2015 is performance evaluation software for vendors and users of computing systems running 3ds Max 2015 3D animation software. It is designed to run on Microsoft Windows 7 64-bit platforms. The benchmark includes 48 tests exercising the latest features in 3ds Max 2015. Users must have a current version of 3ds Max 2015 with Service Pack 1 applied to run the benchmark.

SPECapc^SM for PTC^® Creo^® 3.0
SPECapc for PTC Creo 3.0 is performance evaluation software for vendors and users of computing systems running PTC Creo 3.0 product design software. It is designed to run on Microsoft Windows 7 64-bit platforms. The benchmark includes eight categories of tests exercising the latest features in Creo 3.0. Users must have a current version of PTC Creo 3.0 Datecode M010 to run the benchmark.

SPECapc^SM for Siemens NX 8.5™
SPECapc for Siemens NX 8.5 is performance evaluation software for vendors and users of computing systems running Siemens NX 8.5 CAD/CAM software. It is designed to run on Microsoft Windows 7 64-bit platforms. The benchmark includes 4 models ranging in size from 87MB to 347MB. New features in SPECapc for Siemens NX 8.5 include quality control improvements, faster runtimes and automatic collection of system information for results submissions to the SPEC website.
UPDATE: An updated version (1.0.2) was posted on Feb. 6, 2014. This update includes changes to licensing requirements so that a software development license is no longer required.

The benchmark must be run with Siemens PLM NX 8.5, Maintenance Release 8.5.1.3 (not included).

SPECapc^SM for SolidWorks 2015™
SPECapc for SolidWorks 2015, introduced on July 29, 2015, is performance evaluation software for vendors and users of computing systems running SolidWorks 2015 CAD/CAM software. It is designed to run on Microsoft Windows 7 64-bit platforms.

A fully licensed or trial version of SolidWorks 2015 Service Pack 2 or greater is required to run the benchmark. SolidWorks feature enhancements such as RealView and OIT are baked into the application and support for new graphics hardware is added via service packs. This is the reason that SPECapc has deviated from its norm of requiring just one specific service pack when running the benchmark. Please be aware that performance might differ between service packs. SolidWorks 2015 does not support the use of OIT transparency for all graphics hardware, and will instead use an older style transparency for these cases, so all results might not be directly comparable.

SPECapc requests that users review the setup instructions before running this benchmark. The group recommends resetting application settings back to default and then following the setup instructions to ensure users have the proper settings before running the benchmark. The default application settings need to be altered for PhotoView360 for the CPU tests to run and display properly. The run rules are included in the benchmark package, and have details about the requirements for running the benchmark.