The current (running, clicking, or silent)
Dedicated schematic LED indicator matrix portraying current operating states and fault alarms. Terminal Configuration and Wiring Layout
| Version | Release Date | Key Changes | | :--- | :--- | :--- | | | December 10, 2015 | Initial release | | V1.1 | April 16, 2016 | Added detailed flush mode selection instructions | | V1.2 | January 15, 2017 | Improved EMC; increased power consumption; added wiring notes |
Flashing amber or green indicates active data transmission or reception on the corresponding communication port.
| Specification | Details | | :--- | :--- | | | ROC-2015 (Upgraded from RO-2008/2003) | | Power Supply | AC 220V ±10%, 50/60Hz | | Power Consumption | < 3.5W | | Operating Environment | Temperature: 0 to 50°C; Humidity: ≤85% RH (non-condensing) | | Output Contact Load | Max 5A/250V AC (resistive load) | | External Dimensions | 48mm × 96mm × 80mm (H×W×D) | | Panel Cutout | 44mm × 92mm (H×W) | roc-2015 controller manual pdf
Why buy a ROC-2015 if you aren't using it for custody transfer? The manual breaks down how to configure AGA 3 (Orifice), AGA 7 (Turbine), and AGA 8 (Compressibility). It explains where to input the base pressure, specific gravity, and heating values to ensure your totalized volume is accurate.
Set Data Bits (typically 8 for Modbus RTU), Parity (None, Even, or Odd), and Stop Bits (1 or 2).
: Useful for quick reference on specifications and terminal connections. Key Technical Specifications Power Supply 50 cap H z (standard configuration). Measurement Range (Conductivity). Relay Output
ROC-2015 Controller: The Ultimate Guide and Operation Manual The manual breaks down how to configure AGA
The manual advises checking if the physical pressure switch has failed mechanically. The controller cannot reset the alarm if the external sensor remains open.
If you’ve been hunting for a clear PDF or wondering how to navigate the 400+ pages of technical data, this post is for you.
The unit monitors water levels in the pure water storage tank, halting production when the tank is full and resuming when levels drop. 3. Terminal Wiring and Installation Guide
Comprehensive Guide to the ROC-2015 Reverse Osmosis Controller: Features, Manual, and Troubleshooting : Useful for quick reference on specifications and
Automatically stops production when the pure water tank is full and restarts when the level drops. Membrane Flushing:
: This is the comprehensive technical guide covering wiring, calibration, and settings. Alternative Technical Datasheet
The faceplate includes distinct LEDs that flash or stay lit to indicate process status and specific failure points. These include specific indicators for LOW FEED PRESS (source water shortage), LOW PRESS (filter clog), and HIGH PRESS (pump overpressure).
Periodically inspect all wiring for corrosion or loose connections. Common Troubleshooting:
Alerts that the inlet water pressure is too low.